Construction Services

The Importance of Concrete Repair

concreteConcrete repair is the process of restoring damaged concrete. It is an important part of extending the service life of existing structures.

Before applying new concrete or patching mix, the area must be clean and dry. This includes removing any loose materials that could impact the bond or long-term durability of the concrete. Visit to learn more.

Whether your concrete has small or larger hairline cracks, you should repair them as soon as possible to prevent water from entering and causing further deterioration. A professional can determine if the cracks are serious and recommend proper repair techniques.

Several factors can cause cracks in concrete. Some are the result of poor construction, while others are a natural part of the aging process and can be caused by environmental conditions such as temperature variations, soil settlement, and humidity levels.

Before repairing the cracks, it is important to clean the area around them thoroughly with a pressure washer and detergent. This is to remove any dirt and debris that may have accumulated and can interfere with the bonding process. It is also a good idea to wear eye protection and nitrile gloves. Direct contact with the concrete or its repair materials can cause chemical burns or other injuries.

Once the area is clean, the cracks should be widened to a minimum of 1/4 inch. This helps to ensure that the new cement will be able to fill and seal the crack completely. A chisel tool can be used to broaden the crack and help loosen any concrete that has come away from the wall of the structure. This will provide a better surface for the concrete to adhere to.

After chiseling the crack, a bond breaker can be applied to the surface of the concrete. This creates a space for the new concrete patch to bond with the existing concrete and allows the crack to move without affecting the integrity of the concrete.

Concrete patch is a pre-mixed compound that can be used to repair cracks in concrete surfaces. It is available in a range of colors to match the existing concrete and comes in a variety of sizes to accommodate different-sized cracks. If the crack is too large for the concrete patch, a polyurethane sealant can be applied to provide a stronger and longer-lasting solution.

When using any concrete repair material, it is crucial to follow the manufacturer’s instructions carefully. Failure to do so could result in the new repair failing within a short period of time or even worsening the cracks and creating further damage. It is a good idea to hire a professional to carry out the repairs, as they have the knowledge and experience to do them correctly and safely.

Repairing Slabs

Unlike cracks that show the effects of age, sinking slabs indicate structural problems. This type of problem requires a professional assessment and a concrete repair contractor to determine the cause of the sinking slabs. It may be as simple as the soil not being compacted, or it may be due to a structural issue with the building. Once the cause is determined, the repair process can begin.

There are several methods that can be used to raise sunken slabs back to their original positions. One method uses a special mixture of concrete that is injected underneath the slab and floats it back into place. This method is often referred to by the names “mudjacking” and “concrete injection.” Another way to raise a sunken slab is to replace it with a new, stronger concrete slab. This is sometimes called “slabjacking” and can be a more permanent solution to sinking slabs.

If you choose to use a conventional concrete placement method to repair a damaged slab, it is important that the new concrete bond with the existing concrete. You can achieve this by using a low w/c and a high percentage of coarse aggregate in the concrete mix for the repair. Also, a chemical fortifier can be added to the concrete mix to improve its strength and water resistance.

When repairing cracked slabs, make sure that you address all of the cracks down to their deepest parts. A superficial fix will allow water to leach in through the cracks and undermine the strength of the concrete over time.

Before you start working on a concrete repair, sweep the area to remove any dirt or debris that could prevent the cement from bonding with the existing concrete. If the surface is heavily soiled, you can pressure wash it to clean it before applying the bond coat. After the bond coat has dried, you can begin placing the concrete. For small repairs, a vibratory screed can be used to level the concrete. For larger repairs, a hand screed or a 3-m (10-ft) straightedge will work well. Once the concrete has been leveled, you can apply a plastic surface sealer to keep it looking like new.

Repairing pool decks

Concrete pool decks experience a lot of wear and tear from exposure to water, but that is not the only thing that can cause problems. Chemicals that are used to keep the pool clean can cause the concrete to deteriorate and create cracks. Other issues may be caused by changing temperatures or improper construction. These can all lead to damage to the surface of the pool deck, and it is important that these problems are addressed in a timely manner so that they do not become worse over time.

There are a few different options for repairing concrete pool decks, such as patching and resurfacing. A professional can determine the extent of the damage and suggest the best course of action.

Patching is best if there are only a few areas of spalling or cracks. This process involves rinsing the damaged area with a hose and then cleaning it to remove any dirt or debris that is stuck in the cracks. The area is then filled with a concrete patching material and allowed to cure. If the entire deck needs to be repaired, then resurfacing is a better option.

Resurfacing is similar to patching, but it allows the opportunity to make a new design or pattern on the concrete surface of the pool deck. This can be a great way to add personality to the pool deck and hide any unsightly cracks that might still be present.

If the slabs around your pool are sinking, you will need a professional to help level the concrete. This is a more extensive project than patching and requires special tools like a core drill and a hydraulic concrete pump. It is not recommended that homeowners attempt this type of repair unless they are skilled masons.

Some concrete repairs are simple and easy for a homeowner to do themselves, such as filling in small cracks with patching products. However, for more complicated jobs, like leveling concrete or resurfacing, it is always best to hire a professional contractor. They are more likely to complete the job on time, without errors, and with a finished product that you will be happy with for years to come.

Repairing indoor floors

If you have a concrete floor that is showing signs of spalling, you can use epoxy or urethane to fill the voids and restore your surface. These materials are easy to apply and provide good long-term results.

It is important to clean the surface and surrounding areas of your concrete before starting any repair work. This includes sweeping and power washing to remove debris, then cleaning with a liquid concrete cleaner such as Sakrete’s Top ‘N Bond. This will prepare the area for concrete repair and help remove any bond breakers that might be present.

If the damage to your concrete is due to water migration under your slab, any solution to reduce this problem will help as well. This could include installing french drains or even regrading the soil around your home.

Holes in your concrete floor can also be repaired using a slurry or polymer cement patching mix. This type of repair requires a little more preparation than repairing a crack, but it is still relatively easy. You will need to chisel out the hole and clean the area before you can prepare it for the concrete repair material. Mix the repair compound according to the directions on the package and apply a thin layer over the damaged area.

This can be done with a trowel or a brush. Be sure to cover the entire hole and slurry with a thin coat that is slightly higher than the existing concrete surface. Spritz the area to help the compound set and cure properly.