Construction Management

The Future of Paving? Volvo Unveils Its CX01 Concept Compactor

Asphalt compactors aren’t known as the most difficult machine to operate on the job. Although compactors perform a critical function especially when smoothness specs are at stake, many contractors put their less-seasoned operators on them.

But what if these machines didn’t even require an on-board operator?

Enter Volvo Construction Equipment’s CX01 asphalt compaction concept, a planned ConExpo reveal that had to wait until the recent Utility Expo to get in front of contractors.

“We just wanted to examine what the future of compaction would look like,” Justin Zupanc, head of Volvo CE’s asphalt compaction development team, told Equipment World at the show. “We wanted to create a better operator’s environment, reduce fuel consumption and exhaust emissions and boost productivity.”

“Better operator environment” translates to no cab. Instead, a connected fleet of CX01 single-drum units directed by a downloaded compaction plan would be either be remotely controlled by an operator or controlled autonomously.

Volvo already has an autonomous system on its TA15 haulers, now in customer testing, and the plan is to test a similar system on the CX01, Zupanc says.

The CX01 does not have an articulation joint “so there’s no balance point, there’s nothing that we can steer away from,” Zupanc says. Volvo solved this by using a split-drum which has two halves that can be operated independently   kept upright by using a self-balancing control system. (The split drum comes off of its current 9-ton class machine sold in Europe.) To turn, operators can vary the rate of speed of each half of the drum. “You can make a fairly tight turn,” he says.

And while it wouldn’t be used while the unit is on asphalt, users also would have the ability to pivot steer the machine. 

Rethink the paving process

The Volvo CX01 prototype compactor features guarding and emergency stops on each corner.Equipment World

Volvo says the CX01 which stands for compaction experimental unit No. 1  provides the means to “fundamentally rethink the paving process.” By removing the operator, you’re also removing their exposure to vibration, noise and dust. 

As envisioned, a fleet of CX01s could be deployed on larger jobs and communicate not only with each other but with other machines on site. The machines could survey the job, report on mat conditions such as density, temperature and passes (which intelligent compactors are already doing) and determine when and where to compact. “They can shift over if an area is already compacted,” Zupanc says. “All information is available to the crew and to other machines. You could even send it to the asphalt plant.”

The machine’s compact design and maneuverability could also lead to streamlined compaction cycles, reduced costs and more agile work patterns, Volvo says. The rolling pattern, weight and number of rollers could be adjusted to match the width, thickness and speed of the paving operation. Using Volvo’s existing Co-Pilot system, operators can use a touchscreen to remotely control the compactors.

Flexible power

The CX01 has a flexible power system. It has both a 1.7-liter diesel engine and an energy storage system that can be operated indiesel-only, hybrid or fully electric modes. “The diesel is only there to spin the 20-kilowatt generator,” Zupanc says. The generator in turn powers two 48-volt ultracapacitors placed on each side of the drum, which in turn are powering three 14-kilowatt electric motors, one for each side of the drum, and another to power the vibration system eccentrics. 

“You can run it with the diesel engine on, and it’s always charging the ultracapacitors,” Zupanc says. When the ultracapacitors are charged, the engine can be turned off, and the machine becomes fully electric. The engine will cycle back on when the ultracapacitor charges get low. “They charge very quickly, within a couple of minutes,” he says. The downside: the capacitors don’t have the capacity of a lithium-ion battery; runtime is around 20 minutes, depending on your speed.

“We had never used them before, and we wanted to see how they worked,” Zupanc says, explaining why Volvo was using ultracapacitors on the CX01. “While they don’t have the capacity of lithium-ion batteries, they are good for vibration and they have a long lifecycle. They may not be the right solution because they don’t have that longevity, and who knows, we may couple them with a lithium-ion battery pack down the road.”

Because the ultracapacitors need a constant charge, it’s unlikely that the diesel engine will go away as long as they are used. 

Volvo is also exploring using a low-friction water-reduction polymer-based coating on the drum surface now theoretical — which could also be used on its other compactors. This would combat the common problem of asphalt sticking to the drum, now solved by using water. The CX01, however, has limited water storage.

Volvo produced =the following explainer video of how it envisions the CX01 being used:

CMSBrowserComponents.load({ el: ‘#vue-1634591852644-605’, name: ‘OEmbed’, props: {“mountPoint”:”/__oembed”,”url”:”https://www.youtube.com/watch?v=NzC6q9GgT6o”,”attrs”:{“type”:”oembed”,”id”:”https://www.youtube.com/watch?v=NzC6q9GgT6o”,”element”:”aside”}}, hydrate: false });

Did you miss our previous article…
https://www.3555pacific.com/?p=241

Construction Management

Reduce Errors in the Field with CM Labs, Trimble Earthworks Excavator Simulator Integration

Pay big money for a project design only to have it be used incorrectly in the field? A new partnership between CM Labs and Trimble aims to provide operators with realistic training on grade control technology.

Launched at The Utility Expo in Louisville, Kentucky, the excavator simulation integration allows training organizations to provide operators of all experience levels access to technology on the modern job site.

The Trimble Earthworks for Excavators software works in parallel with CM Lab’s Vortex Studio software and runs on a tablet, which the user can connect to the simulator. Visual aids are overlaid onto the existing ground along with cut/fill information, slope data and other customizable reference points to provide the user with a better understanding of the work that needs to be done.

“To a user, this will look exactly like the Trimble application, but it’s going to be fed by what they’re doing in the simulation,” said Yannick Lefebvre, technical sales manager, CM Labs. “They can go into Earthworks, program the depth that they want to work at, and know when they are going over a hidden utility line – all of that comes into play.”

A variety of configurable views makes it easier to obtain the right perspective for maximum training value. The integration allows users to get familiar with technology without making costly errors in the field. “We’d like you to make the mistakes here. We’d like you to play with the design here,” said Gary James, training instructor/SimGuide specialist, CM Labs. “When you go to a job site, you’re ready to go. You understand exactly how to build a design, follow a map and customize offsets.”

But training isn’t the only use for the simulators. The system can also serve as a company’s first line of defense against bad hires. “It’s the fake it until you make it world we’re trying to get rid of,” said James. “We want guys and girls to go home at the end of the night. The money is not worth anybody’s life. It’s all about safety.”

Trimble Earthworks is available as an add-on with CM Labs’ Excavator Training Pack and will be expanded to other earthmoving modules. The software is compatible with all of CM Labs’ Vortex Simulators.

Did you miss our previous article…
https://www.3555pacific.com/?p=232

Construction Management

JCB Unveils Its Tallest Telehandler, the Rotating 512-83R

JCB is going bigger and taller with its new eight-story-high rotating telehandler, the 512-83R, which it calls three machines in one.

JCB says it can also serve as a crane or be equipped as an aerial work platform.

The telehandler has a max lift height of 83 feet and a max lift capacity of 12,000 pounds. 

The company designed the machine for the changing jobsite in which larger loads need to be lifted to greater heights. JCB has modular home and building construction in mind for the 512-83R, but also says it can be used for any construction site dealing with suspended loads. It is also designed for the rental market, with simple, intuitive controls, and can be used for infrastructure projects, such as bridge work, or in urban areas with little space.

“It’s perfect for lifting and placing materials, panels and modular components at height in a very safe way and in a very productive manner,” said Tim Burnhope, JCB chief innovation and growth officer.


The JCB 512-83R rotating telehandler can also serve as an aerial work platform.JCBThe telehandler delivers continuous 360-degree rotation and is designed for fast setup, as its outriggsers can be automatically extended in 26 seconds and retracted. “Unlike the mobile crane, the [512-83R] can be set up on the site rapidly with outriggers that can be deployed, stored and leveled at the touch of a button,” Burnhope said during the product’s online unveiling.

The telehandler can also be operated by remote control. 

Available attachments include pallet forks, rotating forks, winches, a lifting hook and a light-duty bucket. The attachments use radio-frequency identification, or RFID, so the correct load chart for the tool automatically pops up on the telehandler’s 7-inch screen.

JCB 512-83R rotating telehandler remote control
The JCB 512-83R rotating telehandler can be operated by remote control.JCBThe four-section boom with one telescopic cylinder has a low profile for better operator visibility. A camera can be mounted to its head, so the operator can see better when placing loads at height. The boom can lift up to 4,400 pounds to max height and up to 660 pounds at full horizontal reach, which is 70 feet.

The telehandler runs on a 145-horsepower JCB EcoMax diesel engine and a two-speed hydrostatic transmission. It can travel up to 25 mph and has three steering modes. Turning radius is under 10 feet. Four-wheel drive is available for off-road work.

JCB 512-83R rotating telehandler material handler
JCB 512-83R rotating telehandlerJCBThe engine and the machine’s service points have been placed at ground level for easy access. Service intervals are at 500 hours. Seating options are available for the cab. Work lights and camera kits are optional. A five-year subscription to JCB LiveLink telematics is standard.

JCB says it is currently taking orders for the 512-83R.

JCB 512-83R rotating telehandler lifting
JCB 512-83R rotating telehandlerJCB

Did you miss our previous article…
https://www.3555pacific.com/?p=220

Construction Management

Prinoth Purchases Jarraff Industries, Expands Reach into Right-of-Way Maintenance Market

Prinoth has purchased 100 percent of the capital stock of Jarraff Industries, a Minnesota-based manufacturer of right-of-way maintenance equipment.  The acquisition will further increase Prinoth’s presence in the U.S. and expand its offering in the specialized off-road equipment segment. The agreement was effective October 1. 

“I am very proud of the legacy we have established and nurtured over the past 42 years,” said Heidi Boyum, president, Jarraff Industries. As a family-run and -owned business, I view today’s transaction as an opportunity to ensure that the business, customers, employees, and the community we are in continue growing while joining an even larger family.”

Boyum will continue to work as a strategic advisor to Jarraff Industries and PRINOTH. Jarraff’s COO Steve VanRoekel will remain as the Chief Operating Officer.

Prinoth Group President Klaus Tonhäuser said Prinoth was interested in Jarraff’s products for utilities right of way and maintenance, a segment that is in high demand.

“Jarraff’s specialized product portfolio and strong presence in these critical market segments will provide our customers access to industry-leading products backed by our brand, distribution, and manufacturing experience,” Tonhäuser said in a news release.

PRINOTH is a manufacturer of snow groomers, tracked vehicles and vegetation management vehicles and equipment. 

Did you miss our previous article…
https://www.3555pacific.com/?p=210

Construction Management

Thunder Creek’s Intros Service and Lube Upfit for Medium-Duty Trucks, No CDL or HAZMAT Required

Thunder Creek Equipment’s new Service and Lube Upfit (SLU) for medium-duty truck bodies doesn’t require drivers to have CDL or HAZMAT certifications, saving customers from increased insurance costs, and the cost of hiring highly sought after CDL drivers. 

The new product, launched at The Utility Expo in Louisville, Kentucky, allows for customization much like the company’s Service and Lube Trailer, but with the nimbleness of a medium-duty service body.

Smaller than a traditional service and lube truck, the SLU can be installed on a Ford F-550 or Ram 5500 chassis. “Dealers, rental companies and construction companies are having a hard time hiring technicians and CDL drivers. Plus, they’re finding out they’re not being profitable sending out a $300,000 truck with a $40-an-hour employee to do a simple oil change,” said Steven Ile, territory sales manager, Thunder Creek Equipment. “This affords them the ability to put anybody with a valid driver’s license and basic technical skills in the truck and go.”

A built-in VMAC air compressor powers the entire SLU pneumatic pumping system. The tanks provide a total capacity of 690 gallons and are configurable in 115-, 55-, and 25-gallon tanks, depending on a customer’s fleet maintenance needs.

Fluids supported include fresh oil, reclaimed oil, grease, antifreeze, reclaimed antifreeze, high flow oil, diesel fuel and diesel exhaust fluid. “It is 100 percent customizable,” said Ile. “If one customer needs 345 gallons of fresh oil and 345 gallons of waste oil because they’re only changing oil, we can do that. If the next customer is running Deere, CAT and Komatsu equipment and needs three different spec oils, we can break that up into multiple tanks and give them more fluids.”

All fluid maintenance systems are plumbed into the truck’s new Utility Box, which features a streamlined control panel. The control panel is color coded to match the nozzles and hoses, making it easy to use for operators and reduce training. The SLU also features ample storage for filters and tools.

Each SLU is built to order. Customers can purchase the Service and Lube Upfit via select dealers or directly from Thunder Creek Equipment. 

Construction Management

Bolt Launches New Locks That Use Your Ignition Key

Tools, trailers, receivers and ball mounts are some of the most frequently stolen items around jobsites. Bolt Lock has solutions for all of them without loading up your key ring with a lot of jangling metal.

The company’s One Key locks use specially built tumblers to memorize a vehicle’s ignition key the first time it is inserted into the lock. One complete turn of the key moves the tumblers to fit that specific key, and from that point on, your ignition key will open that lock. Commercial fleets can make duplicates of the master ignition key if they have multiple drivers.

The One Key solution can be applied to numerous security needs.

Bolt’s Stainless Steel Coupler Pin Lock fits couplers from ½-inch to 3 3/8 inches in 1/8-inch increments. The snug fit prevents movement and locks your trailer ball when hitched to a vehicle or makes the coupler unusable when off the vehicle. When your trailer is not hitched to a vehicle, the coupler pin lock secures the locking lever so it cannot be transferred to a different vehicle.

Another dual-purpose lock, the Bolt Receiver is designed to lock the ball mount receiver onto the vehicle’s hitch. It comes in two sizes: ½-inch and 5/8 inches for Class 1 and 2 hitches and Class 3, 4 and 5 hitches, respectively. The receiver lock works by locking the ball mount to the receiver. When the ball mount is attached to the receiver hitch, the receiver lock is inserted and locked into place. This specific lock can be used whether or not your trailer is hitched to the vehicle. The receiver lock prevents the ball mount from being stolen from your vehicle as well as preventing the trailer itself from being stolen with the ball mount receiver.

The company’s Off-Vehicle Coupler Lock was created to meet the demand for a lock to protect unattended trailers. The device serves as a visible theft deterrent when placed on the trailer’s coupler and prevents your trailer from being stolen and secured to another vehicle.

Bolt also offers a cable lock that can secure generators, tools and accessories with a 6-foot-long, quarter-inch black vinyl coated coiled cable. And the Bolt Padlock can be used to secure an enclosed trailer door, lock a toolbox or a gate.

 

 

Did you miss our previous article…
https://www.3555pacific.com/?p=172

Construction Management

“Minimum Swing with Maximum Space”: JCB’s New 245XR Excavator

JCB has expanded its X Series of excavators with the reduced tailswing 28-ton 245XR while maintaining the lineup’s spacious cab.

Between 2018 and 2019, JCB rolled out five X Series excavators. But Tim Burnhope, chief innovation and growth officer, said there was still something missing in the line. As infrastructure needs and funding have grown, more contractors are finding themselves on tighter jobsites.

“We needed to complement our existing conventional tailswing models with a reduced tailswing model, a machine that could [operate] safely in urban settings, on utilities jobsites and on road construction projects,” Burnhope says.

That led JCB to develop the 5-foot 8-inch tailswing model, which has 40% less tail swing than its sister model the 220X. At 28 tons, the 245XR weighs 2 tons more than the 220X. JCB says it gave the 245XR an extra 2 tons of counterweight, and it recessed the counterweight to protect the rear end from impact damage.


JCB designed the reduced-tailswing 245XR excavator for such tasks as roadwork beside traffic.JCBThe next challenge was to reduce tail swing without sacrificing any space for the series’ standard Command Plus cab. JCB reports that the operator station is the same size as the 220X at 39 inches wide and 100 cubic feet of volume, delivering what it calls “minimum swing with maximum space.”  

To achieve the same performance, the company developed what it calls its strongest ever boom. The standard boom is composed of one piece for strength and lighter weight, according to Burnhope. A triple-articulated boom is optional.

A dipper-arm choice of 94 or 118 inches is offered. Dig reach with the mono boom is 31 feet and dig depth is 22 feet. The turntable rated at 26 tons is designed to increase digging force while distributing the force throughout the undercarriage, says Adrian Hall, heavy excavators product general manager.

The 245XR is equipped with heavy-duty track pads of 600 to 900 millimeters for “exceptional stability,” Burnhope says. A dozer blade is optional.

JCB 245XR excavator reduced tail swing
The JCB 245XR excavator’s dig reach with the mono boom is 31 feet and dig depth is 22 feet.JCBThe new excavator – along with all of the five other models in the X Series – gets a new JCB Stage V engine. Stage V is the new European emissions standard. The 245XR runs on a 172-horsepower JCB 448 diesel engine. Stage V and Tier 4 Finals emissions standards are achieved by selective catalytic reduction, diesel particulate filter and diesel oxidation catalyst.

Burnhope says the new engine does not require exhaust gas recirculation. He also says the new engine burns cleaner than the former diesel engine on the 220X, but delivers the same amount of torque of 708 foot-pounds. It also consumes 5% less fuel than the former Tier 4 motor, he says.

The engines now also feature auto-stop and auto-idle as standard to reduce fuel consumption and emissions when not in use.

JCB designed the excavator’s hydraulics for precise, smooth movement. The system features the latest Kawasaki pumps and Kayaba main control valve. The diameter of the hydraulic hose has been increased to improve hydraulic flow for increased performance and efficiency, Burnhope says.

JCB 245XR excavator reduced tail swing cab
JCB kept the same Command Plus cab on its other five X Series excavators on the reduced-tailswing 245XR.JCBThe full-size Command Plus cab is equipped with a variety of seat choices, including one with built-in heating and cooling and electric lumbar support. Standard cab features include rear and side cameras, heating and air, and Bluetooth integrated into the 7-inch control screen. The cab has double cushion viscous mounts to reduce vibration, and interior noise to 69 decibels. The joystick and switch controls are mounted to the seat and move with the operator.

JCB also placed the 245XR’s main service points in one ground-level compartment that is accessed by a large swing door. The company increased service intervals to 2,000 hours for air and hydraulic filters, and to 500 hours for engine oil.

Quick Specs

Max bucket capacity – 1.63 cubic yardsMax operating weight – 60,184 poundsHorsepower – 172Tail swing – 5 feet 8 inchesTravel speed – 1.99 to 3.54 mphMax digging reach (mono boom) – 32 feet 1 inchMax digging depth (mono boom) – 21 feet 9 inches

 

 

Did you miss our previous article…
https://www.3555pacific.com/?p=157

Construction Management

Industry Roundup: National Equipment Dealers buys Richardson

National Equipment Dealers (NED) has bought Richardson Service 1991, expanding its organization in South Carolina.

Based in Conway, South Carolina, Richardson specializes in construction, forestry and compact equipment and will now represent Hyundai Construction Equipment, Manitou, Sakai, Yanmar and Bell.

The former Richardson branch will be the first location among NED companies renamed as NED. Over the coming months, NED will rebrand the remaining MAY-RHI, Earthmovers Construction Equipment and Four Seasons branches to NED.

Through Richardson, NED gains the Berko, CMI and Prinoth lines. The entire Richardson team will remain with NED.

F&W adds Ransome Attachments

Pictured are (from left): Eric Ransome and Barbara Freund of Ransome Attachments, and Matt Valentine and Mark Laigle of F&W.Ransome Attachments

F&W Equipment has added the complete line of attachments offered by Ransome Attachments, including its Exac-One Mini Mower and Black Splitter S2 800 Cone Splitter. 

F&W also offers Kubota compact and mid-size farm and landscaping equipment, Doosan excavators, wheel loaders and compact equipment, as well as other specialty equipment.

Maverick joins Morbark

Maverick Environmental Equipment has been named a Morbark Industrial Products dealer for Ohio, Indiana, Kentucky and western West Virginia. Maverick has locations in Newbury and Bremen, Ohio, with a focus on aggregate processing, waste recycling, forestry and biomass.

H&E completes crane sale 

H&E Equipment Services has completed the $130 million cash sale of its crane business to Manitowoc. H&E says it will use the funds for facilities expansion, rental fleet investment and general corporate purposes. 

“We believe our transition to a pure rental business strategy should result in improved revenues and margins through the industry cycle,” says Brad Barber, H&E CEO.

H&E also sold two earthmoving distribution branches in Arkansas, and will remain a distributor of earthmoving equipment in Louisiana. The company now has 101 branch locations in 24 states.

SMH Group adds Wood’s CRW

Wood’s CRW is now a dealer for Atlas material handlers, owned by SMH Group US. The Atlas line includes mobile industrial machines and industrial tracked machines for the scrap, wood and recycling markets, among others.

Based in Williston, Vermont, Wood’s CRW has four locations with coverage in all or part of eight states. It offers Volvo Construction Equipment, Link-Belt cranes and excavators, National cranes and Mecalac product lines.

Did you miss our previous article…
https://www.3555pacific.com/?p=129

Construction Management

Colorado Contractors Sue Denver Over Vaccine Mandate

Colorado contractors groups are suing the city of Denver over its mandate that workers on government contracts be vaccinated against Covid-19.

The federal lawsuit says the city’s order unlawfully requires contractors to enforce a government mandate and violates due process by commanding “a person to perform an impossible act.”

The order was issued August 2 by Denver Mayor Michael Hancock requiring city employees, along with workers on city contracts, to be fully vaccinated by September 30. Contractors could face fines of $5,000 a day, the suit says.

The contractors’ suit argues that up to half of the industry’s workforce is “vaccine hesitant” – “not because, as may be argued, they have some political opposition, but because the construction industry is largely made up of communities of color who are vaccine hesitant due to mistrust of the government.”

The contractors have offered financial incentives and paid time off to encourage workers to get vaccinated, as well brought in mobile vaccination services to worksites, the suit says.

It adds that the mayor’s order did not provide enough time for workers to become fully vaccinated, even if workers were not hesitant about the vaccine. Contractors are also under tight schedules and budgets on city government contracts “that will be impossible to meet if the contractors have to fire unvaccinated and unexempted employees or reassign them to non-Denver projects (if any exist),” according to the lawsuit.

It notes that contractors could be subject to liability against claims of employees rejecting the vaccine due to medical or religious exemptions. It adds that the order unfairly treats some contractors because it exempts those working at the Denver International Airport.

The lawsuit seeks a declaration that contractors are not required to enforce the order and that the order is unenforceable against them. It also asks the court to prevent the city from enforcing the order on contractors while the case is pending.

The lawsuit includes comments from contractors who say that with large percentages of their workforce unvaccinated, and refusing to be vaccinated, they would not have enough workers to finish their city projects on time and on budget.

It notes, too, that other vaccine mandates, such as those recently announced by President Joe Biden, offer mandatory Covid testing as an alternative to vaccination, “showing that the public interest in preventing the spread of Covid-19 can be advanced without pushing people out of the workforce, imposing yet untold costs and delays to critical city projects, and inflicting loss and liability on private businesses.”

It notes that testing alternatives are also offered by multiple local governments around the country.

The contractors groups suing the city are as follows:

Colorado Contractors AssociationColorado Stone, Sand and Gravel AssociationColorado Ready Mixed Concrete AssociationColorado Motor Carriers AssociationColorado Asphalt Pavement AssociationHispanic Contractors of ColoradoRocky Mountain Mechanical Contractors Association

Michele A. Horn, assistant city attorney for the city and county of Denver, will represent the city and county, as well as Mayor Hancock and Robert McDonald, executive director of the Denver Department of Public Health and Environment, which are also named in the lawsuit. The City Attorney’s Office says it does not comment on active litigation.

 

Did you miss our previous article…
https://www.3555pacific.com/?p=126

Construction Management

I-49 Missouri-Arkansas Connector Now Open for 290 Miles

Another link in the planned six-state I-49 has been completed with five miles of roadway opening between the Arkansas and Missouri border.

The project’s completion leaves a 290-mile interstate route from Kansas City, Missouri, to Fort Smith, Arkansas. The last five miles of the connector opened October 1.

The I-49 and I-29 corridor will also eventually pass through Louisiana, Iowa, South Dakota and North Dakota, stretching for 1,600 miles and connecting at I-29 in Kansas City. Plans are to add links to New Orleans area ports.

I-29 extends from Kansas City to Winnipeg, Canada. The eventual goal is to provide an uninterrupted Interstate Trade Corridor from Canada to New Orleans and into Central and South America to the Panama Canal, according to the I-49 International Coalition.

Transportation officials in Arkansas and Missouri say they have been discussing the connector for more than 25 years. Construction has progressed in phases.


Shaking hands, from left, are Arkansas Governor Asa Hutchinson and Missouri Governor Mike Parson at the ribbon cutting for the last section of the I-49 Missouri-Arkansas Connector.Missouri Department of TransportationThe final five miles were built between Pineville, Missouri, where construction ended in 2012, and the Arkansas state line.

The project involved building a four-lane divided highway west of Route 71. Access to the newly designated interstate section is only by interchanges. A new interchange was built at Missouri Route 90 west of Jane. Five bridges were also constructed.

The project’s estimated cost was $70.3 million.

“This high-quality roadway will help promote tourism, business investment and workforce opportunities between our two great states,” said Missouri Governor Mike Parson.

Did you miss our previous article…
https://www.3555pacific.com/?p=123