Construction Management

JCB Unveils Its Tallest Telehandler, the Rotating 512-83R

JCB is going bigger and taller with its new eight-story-high rotating telehandler, the 512-83R, which it calls three machines in one.

JCB says it can also serve as a crane or be equipped as an aerial work platform.

The telehandler has a max lift height of 83 feet and a max lift capacity of 12,000 pounds. 

The company designed the machine for the changing jobsite in which larger loads need to be lifted to greater heights. JCB has modular home and building construction in mind for the 512-83R, but also says it can be used for any construction site dealing with suspended loads. It is also designed for the rental market, with simple, intuitive controls, and can be used for infrastructure projects, such as bridge work, or in urban areas with little space.

“It’s perfect for lifting and placing materials, panels and modular components at height in a very safe way and in a very productive manner,” said Tim Burnhope, JCB chief innovation and growth officer.


The JCB 512-83R rotating telehandler can also serve as an aerial work platform.JCBThe telehandler delivers continuous 360-degree rotation and is designed for fast setup, as its outriggsers can be automatically extended in 26 seconds and retracted. “Unlike the mobile crane, the [512-83R] can be set up on the site rapidly with outriggers that can be deployed, stored and leveled at the touch of a button,” Burnhope said during the product’s online unveiling.

The telehandler can also be operated by remote control. 

Available attachments include pallet forks, rotating forks, winches, a lifting hook and a light-duty bucket. The attachments use radio-frequency identification, or RFID, so the correct load chart for the tool automatically pops up on the telehandler’s 7-inch screen.

JCB 512-83R rotating telehandler remote control
The JCB 512-83R rotating telehandler can be operated by remote control.JCBThe four-section boom with one telescopic cylinder has a low profile for better operator visibility. A camera can be mounted to its head, so the operator can see better when placing loads at height. The boom can lift up to 4,400 pounds to max height and up to 660 pounds at full horizontal reach, which is 70 feet.

The telehandler runs on a 145-horsepower JCB EcoMax diesel engine and a two-speed hydrostatic transmission. It can travel up to 25 mph and has three steering modes. Turning radius is under 10 feet. Four-wheel drive is available for off-road work.

JCB 512-83R rotating telehandler material handler
JCB 512-83R rotating telehandlerJCBThe engine and the machine’s service points have been placed at ground level for easy access. Service intervals are at 500 hours. Seating options are available for the cab. Work lights and camera kits are optional. A five-year subscription to JCB LiveLink telematics is standard.

JCB says it is currently taking orders for the 512-83R.

JCB 512-83R rotating telehandler lifting
JCB 512-83R rotating telehandlerJCB

Did you miss our previous article…
https://www.3555pacific.com/?p=220

Construction Services

Report: One-Fourth of Infrastructure Faces Flood Risk. (Here’s How to Check Your Area’s Threat Level.)

A new report estimates that one-fourth of all critical infrastructure in the U.S. is at risk of flooding, and that percentage will increase as storms become more severe due to climate change.

The science and technology nonprofit First Street Foundation, in what it calls “the first ever nationwide community level flood resilience report,” says state and local governments are not equipped to handle the present and future flood risks to critical infrastructure.

“As we saw following the devastation of Hurricane Ida, our nation’s infrastructure is not built to a standard that protects against the level of flood risk we face today, let alone how those risks will grow over the next 30 years as the climate changes,” says Matthew Eby, founder and executive director of First Street Foundation.

The “Infrastructure on the Brink” report says that 25% of current “critical infrastructure,” such as utilities, airports, ports, and emergency services like police, fire and hospitals, is at risk of becoming inoperable due to flooding.

It estimates these other current infrastructure flood risks:

23% of all road segments in the country (nearly 2 million miles of road). 20% of all commercial properties (919,000).17% of all “social infrastructure” facilities (72,000). This includes such properties as schools and government buildings.14% of all residential properties (12.4 million).

The risks are expected to increase through 2051.

“Over the next 30 years, due to the impacts of climate change, an additional 1.2 million residential properties, 66,000 commercial properties, 63,000 miles of roads, 6,100 pieces of social infrastructure and 2,000 pieces of critical infrastructure will also have flood risk that would render them inoperable, inaccessible or impassable,” the report says.


This chart shows the expected increase in flood risks by infrastructure category over the next 30 years.First Street Foundation’s “Infrastructure on the Brink” report

The report shows these four states facing the highest concentration of current risk: Louisiana, Florida, Kentucky and West Virginia. Of the top-20 at-risk counties in the U.S., 17 are in these four states.

The report also provides data on all at-risk cities and counties, and you can search on First Street’s website to find the flood risk for your property with the nonprofit’s free FloodFactor tool.

top-20 counties infrastructure flood risk chart
This chart shows the top-20 counties most at-risk to physical infrastructure flooding and the percentages of their infrastructure categories that are at risk. (Note: The “Infrastructure” column represents “critical infrastructure,” such as airports, fire stations, hospitals, police stations, ports, power stations.)First Street Foundation’s “Infrastructure on the Brink” report

For cities facing the most flood risk today, Moliere and New Orleans, Louisiana, top the rankings, with most, if not all, of their infrastructure vulnerable. Cities in California, South Carolina, Florida and Alabama also made the list.

top-20 cities infrastructure flood risk chart
This chart shows the top-20 cities most at-risk to physical infrastructure flooding and the percentages of their infrastructure categories that are at risk. (Note: The “Infrastructure” column represents “critical infrastructure,” such as airports, fire stations, hospitals, police stations, ports, power stations.)First Street Foundation’s “Infrastructure on the Brink” report

The report also looks into the future, showing which counties will see the largest percentage increase in infrastructure risk by 2051. Virginia has several metro areas facing a significantly increased threat. The list also includes counties in North Carolina, Massachusetts, Maryland and Texas.

top-20 counties increased flood risk
This chart shows the top-20 counties with the highest estimated percentage increase of risk to physical infrastructure flooding by 2051 and the percentages of their infrastructure categories that are at risk. (Note: The “Infrastructure” column represents “critical infrastructure,” such as airports, fire stations, hospitals, police stations, ports, power stations.)First Street Foundation’s “Infrastructure on the Brink” report

The report says the impact of the increased risks could devastate local communities. It notes that in Harris County, Texas, home to Houston, 770 hospitals, public utilities and water-treatment plants currently risk becoming inoperable due to flooding this year.

Miami-Dade, Florida, has 1,640 schools, churches and museums at risk. The Chicago metro area has 225,000 residential properties at risk. And in the New Orleans area, 99% of the roads are at risk of becoming undrivable because of flooding, the report says.

First Street Foundation hopes the data will help prioritize funding toward protecting infrastructure from flood risks.

“Our work aims to determine the amount of flooding that would render infrastructure either inoperable or inaccessible,” says Dr. Jeremy Porter of First Street Foundation. “By applying research on depth thresholds and comparing them to flood data and probability metrics, we can determine roughly the extent of flooding that would cause a road to be impassable to cars, or a hospital to be shut down.”

infrastructure flood risk locator map
This map shows where the greatest flood risks are to infrastructure.First Street Foundation’s “Infrastructure on the Brink” report

Construction Management

Prinoth Purchases Jarraff Industries, Expands Reach into Right-of-Way Maintenance Market

Prinoth has purchased 100 percent of the capital stock of Jarraff Industries, a Minnesota-based manufacturer of right-of-way maintenance equipment.  The acquisition will further increase Prinoth’s presence in the U.S. and expand its offering in the specialized off-road equipment segment. The agreement was effective October 1. 

“I am very proud of the legacy we have established and nurtured over the past 42 years,” said Heidi Boyum, president, Jarraff Industries. As a family-run and -owned business, I view today’s transaction as an opportunity to ensure that the business, customers, employees, and the community we are in continue growing while joining an even larger family.”

Boyum will continue to work as a strategic advisor to Jarraff Industries and PRINOTH. Jarraff’s COO Steve VanRoekel will remain as the Chief Operating Officer.

Prinoth Group President Klaus Tonhäuser said Prinoth was interested in Jarraff’s products for utilities right of way and maintenance, a segment that is in high demand.

“Jarraff’s specialized product portfolio and strong presence in these critical market segments will provide our customers access to industry-leading products backed by our brand, distribution, and manufacturing experience,” Tonhäuser said in a news release.

PRINOTH is a manufacturer of snow groomers, tracked vehicles and vegetation management vehicles and equipment. 

Did you miss our previous article…
https://www.3555pacific.com/?p=210

Construction Services

Industry Roundup: H&E Opens 3rd Utah Branch

H&E Equipment Services has opened a new rental branch just north of Salt Lake City in Ogden. It is the company’s third Utah facility.

The 8,500-square-foot facility sits on three acres and features a fenced yard, offices, parts warehouse and separate repair shot with six service bays. The facility will offer construction and general industrial equipment for customers in northern Utah, southeast Idaho and western Wyoming.

Chris Baron, who also leads the company’s Salt Lake City branch, will manage the location. 

Kirby-Smith names Kunin VP, adds Atlas

Kirby-Smith Machinery (KSM) has named Mike Kunin vice president of national accounts, following the promotion of John Arapidis to president and CEO.

Kunin will oversee the management and continued development of strategic partnerships between the company and its national account customers. He comes to the dealership after having held several key positions at Komatsu America during the past 21 years, including parts sales, construction and support equipment and most recently as business director of Komatsu’s central region. He will be located in KSM’s headquarters in Oklahoma City.

Atlas material handler picking up pieces of metal
SMH GroupKMS has also added the SMH Group US’s line of Atlas material handlers and will represented the line in Oklahoma, Kansas, Missouri and Illinois. The Atlas line includes mobile industrial and industrial tracked machines for the scrap, wood and recycling markets, among others.

KMS has 12 branch locations in Oklahoma, Texas, Kansas and Missouri.

W.W. Williams relocates Charleston store

W.W. Williams Company’s Charleston, South Carolina, branch has moved to a new location. The 20,000-square-foot facility has 14 service bays for repairing and servicing medium- and heavy-duty trucks, fleets, construction equipment, emergency vehicles and marine vessels in addition to power generation sales and service. 

Maverick Environmental adds Morbark line

Maverick Environmental Equipment has become a Morbark Industrial Products dealer for Ohio, Indiana, Kentucky ad western West Virginia. The company will sell and service Morbark’s line of tree care, forestry, sawmill and wood recycling equipment.

Herc buys Rapid Equipment Rental

Herc Holdings, parent of Herc Rental, has bought Toronto-based Rapid Equipment Rental. Rapid Equipment Rental currently has 110 employees and seven locations. Founded in 2013, it serves the industrial and construction markets in Toronto and the surrounding areas. 

Herc says the acquisition supports its long-term strategy to achieve greater density and scale in select urban markets across North America. It currently has 295 locations in North America.

MANUFACTURERS

Bomag adds milling, paving VP

Bomag Americas has named Chris Colwell its vice president of milling and paving, responsible for overseeing the company’s new business unit segment. Colwell’s industry experience includes positions with Astec Industries, Carlson Paving Products and managing a road construction equipment dealership.

Generac expands in Wisconsin

Generac has announced it will invest $53 million in facilities across the state over the next three years, creating more than 700 jobs. Expansion plans include a new administrative and R&D facility in Pewaukee, announced in July. The company’s global headquarters will remain in Waukesha, Wisconsin.

Did you miss our previous article…
https://www.3555pacific.com/?p=206

Construction Management

Thunder Creek’s Intros Service and Lube Upfit for Medium-Duty Trucks, No CDL or HAZMAT Required

Thunder Creek Equipment’s new Service and Lube Upfit (SLU) for medium-duty truck bodies doesn’t require drivers to have CDL or HAZMAT certifications, saving customers from increased insurance costs, and the cost of hiring highly sought after CDL drivers. 

The new product, launched at The Utility Expo in Louisville, Kentucky, allows for customization much like the company’s Service and Lube Trailer, but with the nimbleness of a medium-duty service body.

Smaller than a traditional service and lube truck, the SLU can be installed on a Ford F-550 or Ram 5500 chassis. “Dealers, rental companies and construction companies are having a hard time hiring technicians and CDL drivers. Plus, they’re finding out they’re not being profitable sending out a $300,000 truck with a $40-an-hour employee to do a simple oil change,” said Steven Ile, territory sales manager, Thunder Creek Equipment. “This affords them the ability to put anybody with a valid driver’s license and basic technical skills in the truck and go.”

A built-in VMAC air compressor powers the entire SLU pneumatic pumping system. The tanks provide a total capacity of 690 gallons and are configurable in 115-, 55-, and 25-gallon tanks, depending on a customer’s fleet maintenance needs.

Fluids supported include fresh oil, reclaimed oil, grease, antifreeze, reclaimed antifreeze, high flow oil, diesel fuel and diesel exhaust fluid. “It is 100 percent customizable,” said Ile. “If one customer needs 345 gallons of fresh oil and 345 gallons of waste oil because they’re only changing oil, we can do that. If the next customer is running Deere, CAT and Komatsu equipment and needs three different spec oils, we can break that up into multiple tanks and give them more fluids.”

All fluid maintenance systems are plumbed into the truck’s new Utility Box, which features a streamlined control panel. The control panel is color coded to match the nozzles and hoses, making it easy to use for operators and reduce training. The SLU also features ample storage for filters and tools.

Each SLU is built to order. Customers can purchase the Service and Lube Upfit via select dealers or directly from Thunder Creek Equipment. 

Construction Blogs

Contractors’ Picks for the Top Products at The Utility Expo

From electric equipment to versatile attachments, there was no shortage of new and improved products at the 2021 Utility Expo. With more than 900 exhibitors and 32 acres of exhibit space, it can be easy to miss that game-changing innovation you never knew you needed. So, we hustled the show floor at the Louisville Convention Center and met with contractors to see what products caught their eye.

Here are contractors’ top products from the 2021 Utility Expo.


Volvo ECR25 Electric Mini ExcavatorJordanne Waldschmidt

Product: Volvo ECR25 Electric excavator

Recommended by: Brandon Adams, Full Tilt Grading 

Why: “The electric excavator was crazy fast. It had all the power you needed and never bogged down like a diesel would. You could track, dig and swing the boom at the same time, which for what we do is a must and hard to find in smaller equipment. The cost and battery life are going to be a downfall, but it has its place. I would definitely buy one if it had an 8-hour runtime.”

AMI Axxis Tiltrotator
AMI Axxis TiltrotatorAMI Attachments

Product: AMI Axxis Tiltrotator

Recommended by: Brad Campbell, Top Notch Excavating LLC

Why: “I went to the show to get a hands-on look at tiltrotators. While the engcon, Steelwrist and AMI Attachments tiltrotators were all great, I preferred the AMI Axxis. The Axxis doesn’t have any exposed tilt cylinders; therefore, it has a narrower profile. You could excavate a narrower trench, plus the cylinders aren’t sticking out to get damaged.”

John Deere 333G CTL with Dozer Blade
John Deere 333G CTL with Dozer BladeJordanne Waldschmidt

Product: John Deere 33G CTL with Dozer Blade and 3D Grade Control

Recommended by: Zack Ford, Countryside Landworks LLC

Why: “What I liked about the CTL with the dozer blade was how easy it was to run. There wasn’t much of a learning curve. It was simple to change your grade on the fly with the push of a button. I could see using this where a smaller dozer wouldn’t fit. With the ability to take off the blade and run other attachments, it allows for versatility and fewer machines sitting around that you need to find work for.”

Icom F3210D / F4210D Entry Level IDAS™ Trunking Portables VHF/UHF
Icom F3210D / F4210D Entry Level IDAS™ Trunking Portables VHF/UHFIcom America Inc.

Product: Icom Communications System

Recommended by: Ryan Goodfellow, Rock Structures Utility & Excavating 

Why: “We’re looking for something that we can use as a company to communicate as a group or individually. The Icom Communications System is a radio that uses the AT&T cellular network. I’m hoping that this will help us get on the same page for our daily needs.”

Felco Industries Wheel Compactor
Felco Industries Wheel CompactorFelco Industries

Product: Felco Industries Compaction Wheel

Recommended by: Brandon Johnson, Elite Earthworks

Why: “One of my favorite excavator attachments was the Felco compaction wheel. For a one-man show, this is a great investment. Not only can you do a better job at compacting material either in a ditch or backfill around a basement, but you can also get it done quickly or without the need for another person or machine.”

Mastadon Forestry Mulcher
Mastadon Forestry MulcherMastadon

Product: Mastadon M60 Forestry Mulcher

Recommended by: Davin Jones, Advanced Terrain Solutions

Why: “Mastadon is using some super cool technology in their tooth design and in the wireless technology for the mulcher. They have a mulcher model that can give the operator real-time data on oil temperature, pressure and gpm flow to let the operator know how the head and machine are performing. Plus, it’s a direct drive system so there is no belt to tune or periodically replace.”

Volvo CX01 autonomous single-drum asphalt compactor concept
Volvo CX01 autonomous single-drum asphalt compactor conceptVolvo Construction Equipment

Product: Volvo CX01 autonomous single-drum asphalt compactor concept

Recommended by: Corey Lockheart, WML Enterprises LLC

Why: “I went to The Utility Expo specifically to check out the technical advancements in the industry. The Volvo roller absolutely stood out. Automation and robots are becoming more and more common, and I can’t wait to integrate them into my business, especially in areas that are dangerous for humans.”

Construction Services

Contractors Get First Glimpse of Deere Electric 310 X-Tier Backhoe (Video)

Product details are still sketchy after all, it’s still a test machine  but John Deere used the Utility Expo to strut out its electric backhoe, the 310 X-tier E-Power, now in real-world testing with utility client National Grid.

“The battery electric technology on the 310 X-tier is one way we’re going to give leading-edge performance with innovative technology,” says Justin Steger, Deere solutions marketing manager. “It is geared toward customers that have stated carbon emissions-reduction goals.”

Throughout the spring and summer, National Grid used the machine to perform a variety of jobs, including trenching, loading, digging,  backfilling and using a breaker, says Brian Hennings, Deere product manager, speaking to Equipment World. Up next: cold-weather tests.

The “X-tier” identifies that it has a unique power train, says Hennings. “If we eventually do come out in the marketplace and things look very positive — the model would be offered as a 310 X.”

The placard next to the 310 X-tier at the Utility Expo said the machine represented an “early Phase 1 development in clean-energy solutions,” the same language Deere used in its January announcement that it was testing the machine. Deere will head into Phase 2 testing next year, Hennings says, and targeting energy consumption by specific components. “We want to offer at least an 8- to 10-hour composite runtime,” he says.

“We’re very early in this journey, and it’s going to take many iterations to meet customer expectations,” Hennings says, noting that even retaining the top 25 mph travel speed can consume a great deal of power. “It’s going to be more a matter of years instead of a matter of months.”

The 310 X-tier is positioned in direct comparison with the Deere 310L. Deere knows the electric unit will be compared with the runtime of the diesel unit, which has a 34-gallon tank and typically provides more than a day’s worth of work. One positive for the electric machine: it has an outside-machine decibel level of 75 while the 310L runs at 89 decibels. “It doesn’t sound like a lot on paper, but it’s not as loud as my dishwasher,”  Steger says. 

Jordanne Waldschmidt, chief editor of Equipment World, caught up with Joe Dietz, the chief technology officer at excavation contractor Bob Dietz & Sons, New Paltz, New York, at the show. Dietz and his two brothers also serve as ambassadors for Deere, sharing their passion for the brand on social media. Here he gives his impressions after operating the 310X-tier for the first time:

CMSBrowserComponents.load({ el: ‘#vue-1633975716830-377’, name: ‘OEmbed’, props: {“mountPoint”:”/__oembed”,”url”:”https://youtu.be/Gf25ST98g6Y”,”attrs”:{“type”:”oembed”,”id”:”https://youtu.be/Gf25ST98g6Y”,”element”:”aside”}}, hydrate: false });

Hennings says utility companies, such as National Grid, along with municipalities working under emission mandates, are likely to be first adaptors of the 310 X-tier when it comes to market.

What we know now

John Deere

As mentioned, Deere compares the 310 X-tier with the diesel-powered 310L. It has a net peak power of 75 kilowatts (equivalent to 100 horsepower) at 1,600 rpm. The placard at the Utility Show posted 310 X-tier specs in line with those of the 310L:

14-foot 1-inch max dig depth.6,602-pound loader lifting capacity. 6,992-pound crowd cylinder digging force. 22.8 mph max travel speed.

One noticeable difference: the 310L has a listed operating weight of 14,669 pounds; for the 310 X-tier that gets bumped up to 16,119 pounds. 

But again, these are just Phase 1 specs. “There will likely be many changes in the specs before it’s available for sale,” Hennings says.

John Deere announced in January that it had partnered with energy company National Grid an electric, natural gas and clean energy company serving more than 20 million customers in the Northeast to pioneer the machine.

At the time, Jason Daly, Deere global director, production systems, technology and marketing, called the project “another stepping stone in our backhoe innovation journey.” Adds Hennings: “This is an exciting project for the Deere backhoe design team.”

Did you miss our previous article…
https://www.3555pacific.com/?p=191

Construction Blogs

From Beaches to Bases, This N.C. Contractor Loves to Move Dirt

Two things you quickly learn about Matt Mitchell is that he loves Sneads Ferry, North Carolina, where he has lived all his life.

And he loves dirt.

“A grown man might be a grown man, but somewhere deep down he’s still got a little boy in him,” he says. “And they all like to play with little toys and dirt.”

“I love the challenges,” he adds, when explaining why he loves being a contractor. “I really like doing the things they say you can’t do, or can’t be done.”

That attitude has led his business, C.M. Mitchell Construction Company, to grow to more than 50 employees, 35 pieces of equipment and annual revenues of $10 million to $13 million. For that and more, Matt is one of Equipment World’s 2020 Contractor of the Year Award finalists.

Hard lessons

Matt learned about hard work, honesty and integrity from his father, a retired Marine who had been stationed at nearby Camp Lejeune. His father and mother ran a little country store and tackle shop on Vultures Landing.

“Son, your word is all you’ve got,” his dad would tell him.

He helped instill a strong work ethic in Matt.

“As a Marine, he taught us how to work, and he taught us what our backs are made for,” Matt recalls. “When I was growing up, it was all back-breaking work. He wasn’t taking any shortcuts.”

They would also dig the graves for local residents who passed away. It was a free service his father started, and Mitchell Construction continues it to this day.

As a teen, Matt worked for a family friend who owned a construction company. Matt would run a dozer and excavator and drive a dump truck. He worked for him for about 10 years. Then the owner had a heart attack and sold the business.

Matt bought a commercial fishing boat, but that new career lasted only about 10 weeks. “I was there one day fishing, and I just said, ‘I’m done with this. I’m going back in the dirt business. I’m going to do it myself.’”

That was in 1994. He used the money from selling the boat to buy a farm tractor and a trailer. His parents co-signed for a $25,000 loan. Matt used that money to buy a 1974 dump truck, a backhoe and a dozer.

His brother Mel drove the dump truck, and Matt moved dirt. They cleared lots, put in driveway culverts, whatever people needed done.

He did a lot of subcontracting work and landed his first big job at Camp Lejeune. During that job, he met Theresa who was working for the general contractor on the project. She helped him with the paperwork, and he told her if she ever decided to leave her job, he wanted her to come work for him.

“I don’t think you can afford me,” she told him.

But in time he won her over, and they’ve been keeping C.M. Mitchell growing ever since.

With her as chief financial officer and Matt running the construction business, they’ve landed many multimillion dollar projects over the years.

Landing big jobs

The company won its first job over $1 million by traveling to Virginia to meet with a large construction firm. The company was planning a complicated project involving a 100-square-foot amphibious boat ramp at Camp Lejuene. Matt convinced them he could handle the work.

“We were so excited,” recalls Theresa. “We had a $2 million job.”


With Matt running the construction operations and Theresa running the office, the couple have built a successful construction firm in Sneads Ferry, N.C.Equipment WorldThey began hiring more employees. Along with the boat ramp, the project involved building docks, ponds and a parking lot, as well as installing sewer and drainage lines.

The work was going well, but the finances ran into trouble. Mitchell wasn’t getting paid by the contractor on the project, and the company needed the money to pay off the project’s financing.

The contractor eventually paid the $800,000 he owed Mitchell. But the stress of trying to collect it had left Matt and Theresa rethinking their business. “One minute you’re up there, and the next minute you could lose your home if somebody doesn’t pay you,” says Theresa. The couple were also raising their three sons at the time.

After another episode in which they had to take a contractor to court to get paid, they decided to reorganize and trim down. “We’re going to stop going after the big work,” she says. “Let’s gain control of what we’re doing.”

They became more cautious about the contractors they subbed for. They landed work with large contractors, which brought them multiple projects. And they paid on time.

“We were able to pick and choose who we worked for,” Theresa says. “We could do some background on them and make sure that the people we were trying to be a subcontractor for were of good character.”

Then the September 11 terrorist attacks caused the local construction economy to tank. Mitchell was able make it through with projects on military bases. Government projects also got them through the Great Recession.

In 2011, the company had grown to 40 or so employees. And Matt decided to scale back to about 25 workers. He started turning some of his attention toward other ventures. He opened a restaurant and a boat store. He bought two shrimp boats. He bought and renovated boats and sold them. Then he spent about five years building his own boat – all while still running his construction firm.

“I don’t know why this was going on,” says Theresa. She calls it his “nostalgia tour.”

Matt just laughs.

“But one thing about my husband,” she adds. “He has no hobbies. Everything he does has to generate revenue.”

Ramping back up

Meanwhile, the construction firm was doing well, holding steady. And eventually, many of the side ventures drifted away.

“Our real passion that really drives us is here,” Theresa says, referring to Mitchell Construction.

C.M. Mitchell Construction beach renourishment
Dump trucks haul in sand and an excavator fills dump trucks on the beach to rebuild dunes in North Carolina eroded by Hurricane Florence.Equipment WorldTwo of their sons love construction work, and the couple want the company to be available for them.

The company has grown back to 50 employees. It updated its accounting software, switched to project management software and began using iPads on jobsites. They also increased pay and benefits to attract and keep good employees.

Along with the changes, the company has continued to benefit from Matt’s work ethic and quality standards.

“A lot of people really respect Matt,” Theresa says. “A lot of his employees respect him because he’s the type of guy who is out there in the ditch with them.”

The company also maintains a family atmosphere. Theresa cooks lunch each day at the office for employees. A number of the employees are actual family members.

Their oldest son, Mark, has worked with them since 2000 and recently branched out on his own to start a concrete business. Their youngest son, Matthew, is the company’s asphalt division supervisor. Matt’s two brothers and Theresa’s sisters also work for the company.

“We’ve always been a real tightknit family,” Matt says.

Moving dirt

One of Mitchell’s latest projects has been rebuilding the sand dunes on Surf City and North Topsail beaches, which had eroded during Hurricane Florence.

The projects involved hauling in and placing more than 200,000 cubic yards of sand. Mitchell dump trucks came and went hauling sand from miles away, while excavators and dozers moved like clockwork to build the dunes.

“I can move dirt, and I love moving dirt,” Matt says.

Surf City Town Clerk Stephanie Hobbs agrees.

“They’re a great company,” she says. “I would give them the highest rating you have. They show up in a timely manner and get the job done on time and on budget.”

Matt attributes his success to hard work and recommends the same for new contractors.

“You’ve got to work hard. You’ve got to put your time in,” he says. “When everybody else is off having fun, you’ve got to go make a deal with somebody.”

CM Mitchell construction dune restoration
C.M. Mitchell Construction dozers rebuild dunes damaged by Hurricane Florence.Equipment World 

Did you miss our previous article…
https://www.3555pacific.com/?p=186

Construction Blogs

Diesel Prices Jump as Crude Oil Hits Highest Price Since 2014

Increased demand amid the easing of the pandemic and OPEC+ supply limitations have caused the price of diesel to jump 10.5 cents in the past week. The average retail price of a gallon of on-highway diesel soared to $3.47 during the week of October 4, according to the U.S. Department of Energy’s Energy Information Administration. That’s $1.08 higher than just one year ago.

The nation’s most expensive diesel on average is in California at $4.369, while the least expensive diesel on average is $3.203 a gallon in the Gulf Coast. The Midwest region saw the nation’s highest one-week increase at 10.4 cents. The smallest one-week increase was 3.0 cents in California.

The Biden administration has urged OPEC+ to increase production and is considering releasing crude oil reserves to cool prices. U.S. West Texas Intermediate crude oil hit its highest price since 2014 at $81.06 per barrel. Crude oil accounts for 49%t of the cost of a gallon of diesel.

Price increases this fall were also impacted by storm damage. Several refineries in Louisiana are still preparing to restart after flooding and power outages caused by Hurricane Ida. Louisiana’s 17 oil refineries account for nearly one-fifth of the nation’s refining capacity and can process about 3.4 million barrels of crude oil per day, says the U.S. Energy Information Administration.

Complete diesel price information is available on EIA’s website.


Diesel prices are up more than $1 per gallon compared to one year ago.U.S. Energy Information Administration

Did you miss our previous article…
https://www.3555pacific.com/?p=183

Construction Blogs

Polaris Launches Mid-Size Pro XD UTV as a Truck Alternative on the Jobsite

Polaris has rolled out a new mid-size entry to its Pro XD Commercial lineup of UTVs, designed for hauling workers and tools around construction sites.

The mid-size UTV, which stands for utility terrain vehicle, comes in two- and four-door versions and features a bed with a 500-pound capacity. Polaris touts the new all-terrain vehicle as a lower-cost alternative to a truck or van for moving about the jobsite. Its compact size enables it to maneuver in tight spaces.

Along with hauling tools and people, it can move supplies, aggregate and other materials. The company says it can also handle mud, nails and obstacles better than a truck or van when traveling the jobsite.


Haul aggregate and other materials with the 500-pound capacity bed on the Polaris mid-size Pro XD UTV.PolarisThe mid-size vehicle follows the introduction of the company’s full-size Commercial models in 2018. It’s made for those who don’t need the 1,000-plus-pound bed capacity of the full-size UTVs. Polaris says the mid-size version provides 200-hour oil service intervals, as well as the same safety features of the full-size models, including adjustable speed calibration, operator warnings, backup horn and pedestrian alarms, high-visibility lights and improved operator visibility.

“Not all of our customers need to haul over 1,000 pounds in the cargo bed, but they still want a heavy-duty driveline, 200-hour intervals between oil changes, durable components and vehicle fault alarms,” says Aaron Stegeman, director of commercial sales, service and customer experience for Polaris Commercial.

Polaris mid-size Pro XD UTV
The mid-size Polaris Pro XD UTV is also designed for carrying tools around on the jobsite.PolarisThe mid-size Pro XD features heavy-duty driveline components for longer life. The seats are made of Kevlar-backed vinyl that is puncture resistant. The heavy-duty jobsite tires are 8-ply with nondirectional treads. Parts are designed to be universal and easy to replace. The company also says it made the roof and doors as tightly sealed as possible to keep out dust and the elements.

The UTV runs on a 39.5-horsepower Polaris Pro Star 570 DOHC (dual overhead cam shaft) gas engine.

Both the two-door and four-door models have selectable 4×4 drive. Top speed is adjustable up to 40 mph. Ground clearance is 10 inches.

Total payload is 1,000 pounds on the two-door model and 1,250 on the four-door UTV. Towing capacity is 1,500 pounds.

Polaris mid-size Pro XD UTV
The seats in the new mid-size Polaris Pro XD UTV are made of Kevlar-backed vinyl for puncture resistance.PolarisThe MSRP on the two-door model starts at $12,499, and for the four-door at $13,999.

Available accessories include various types of windshields, a windshield wiper and washer system, various types of roofs and roof liners, doors, rear window panels, lighting, sideview mirrors, among other add-ons.

 

Did you miss our previous article…
https://www.3555pacific.com/?p=178