Construction Blogs

From Beaches to Bases, This N.C. Contractor Loves to Move Dirt

Two things you quickly learn about Matt Mitchell is that he loves Sneads Ferry, North Carolina, where he has lived all his life.

And he loves dirt.

“A grown man might be a grown man, but somewhere deep down he’s still got a little boy in him,” he says. “And they all like to play with little toys and dirt.”

“I love the challenges,” he adds, when explaining why he loves being a contractor. “I really like doing the things they say you can’t do, or can’t be done.”

That attitude has led his business, C.M. Mitchell Construction Company, to grow to more than 50 employees, 35 pieces of equipment and annual revenues of $10 million to $13 million. For that and more, Matt is one of Equipment World’s 2020 Contractor of the Year Award finalists.

Hard lessons

Matt learned about hard work, honesty and integrity from his father, a retired Marine who had been stationed at nearby Camp Lejeune. His father and mother ran a little country store and tackle shop on Vultures Landing.

“Son, your word is all you’ve got,” his dad would tell him.

He helped instill a strong work ethic in Matt.

“As a Marine, he taught us how to work, and he taught us what our backs are made for,” Matt recalls. “When I was growing up, it was all back-breaking work. He wasn’t taking any shortcuts.”

They would also dig the graves for local residents who passed away. It was a free service his father started, and Mitchell Construction continues it to this day.

As a teen, Matt worked for a family friend who owned a construction company. Matt would run a dozer and excavator and drive a dump truck. He worked for him for about 10 years. Then the owner had a heart attack and sold the business.

Matt bought a commercial fishing boat, but that new career lasted only about 10 weeks. “I was there one day fishing, and I just said, ‘I’m done with this. I’m going back in the dirt business. I’m going to do it myself.’”

That was in 1994. He used the money from selling the boat to buy a farm tractor and a trailer. His parents co-signed for a $25,000 loan. Matt used that money to buy a 1974 dump truck, a backhoe and a dozer.

His brother Mel drove the dump truck, and Matt moved dirt. They cleared lots, put in driveway culverts, whatever people needed done.

He did a lot of subcontracting work and landed his first big job at Camp Lejeune. During that job, he met Theresa who was working for the general contractor on the project. She helped him with the paperwork, and he told her if she ever decided to leave her job, he wanted her to come work for him.

“I don’t think you can afford me,” she told him.

But in time he won her over, and they’ve been keeping C.M. Mitchell growing ever since.

With her as chief financial officer and Matt running the construction business, they’ve landed many multimillion dollar projects over the years.

Landing big jobs

The company won its first job over $1 million by traveling to Virginia to meet with a large construction firm. The company was planning a complicated project involving a 100-square-foot amphibious boat ramp at Camp Lejuene. Matt convinced them he could handle the work.

“We were so excited,” recalls Theresa. “We had a $2 million job.”


With Matt running the construction operations and Theresa running the office, the couple have built a successful construction firm in Sneads Ferry, N.C.Equipment WorldThey began hiring more employees. Along with the boat ramp, the project involved building docks, ponds and a parking lot, as well as installing sewer and drainage lines.

The work was going well, but the finances ran into trouble. Mitchell wasn’t getting paid by the contractor on the project, and the company needed the money to pay off the project’s financing.

The contractor eventually paid the $800,000 he owed Mitchell. But the stress of trying to collect it had left Matt and Theresa rethinking their business. “One minute you’re up there, and the next minute you could lose your home if somebody doesn’t pay you,” says Theresa. The couple were also raising their three sons at the time.

After another episode in which they had to take a contractor to court to get paid, they decided to reorganize and trim down. “We’re going to stop going after the big work,” she says. “Let’s gain control of what we’re doing.”

They became more cautious about the contractors they subbed for. They landed work with large contractors, which brought them multiple projects. And they paid on time.

“We were able to pick and choose who we worked for,” Theresa says. “We could do some background on them and make sure that the people we were trying to be a subcontractor for were of good character.”

Then the September 11 terrorist attacks caused the local construction economy to tank. Mitchell was able make it through with projects on military bases. Government projects also got them through the Great Recession.

In 2011, the company had grown to 40 or so employees. And Matt decided to scale back to about 25 workers. He started turning some of his attention toward other ventures. He opened a restaurant and a boat store. He bought two shrimp boats. He bought and renovated boats and sold them. Then he spent about five years building his own boat – all while still running his construction firm.

“I don’t know why this was going on,” says Theresa. She calls it his “nostalgia tour.”

Matt just laughs.

“But one thing about my husband,” she adds. “He has no hobbies. Everything he does has to generate revenue.”

Ramping back up

Meanwhile, the construction firm was doing well, holding steady. And eventually, many of the side ventures drifted away.

“Our real passion that really drives us is here,” Theresa says, referring to Mitchell Construction.

C.M. Mitchell Construction beach renourishment
Dump trucks haul in sand and an excavator fills dump trucks on the beach to rebuild dunes in North Carolina eroded by Hurricane Florence.Equipment WorldTwo of their sons love construction work, and the couple want the company to be available for them.

The company has grown back to 50 employees. It updated its accounting software, switched to project management software and began using iPads on jobsites. They also increased pay and benefits to attract and keep good employees.

Along with the changes, the company has continued to benefit from Matt’s work ethic and quality standards.

“A lot of people really respect Matt,” Theresa says. “A lot of his employees respect him because he’s the type of guy who is out there in the ditch with them.”

The company also maintains a family atmosphere. Theresa cooks lunch each day at the office for employees. A number of the employees are actual family members.

Their oldest son, Mark, has worked with them since 2000 and recently branched out on his own to start a concrete business. Their youngest son, Matthew, is the company’s asphalt division supervisor. Matt’s two brothers and Theresa’s sisters also work for the company.

“We’ve always been a real tightknit family,” Matt says.

Moving dirt

One of Mitchell’s latest projects has been rebuilding the sand dunes on Surf City and North Topsail beaches, which had eroded during Hurricane Florence.

The projects involved hauling in and placing more than 200,000 cubic yards of sand. Mitchell dump trucks came and went hauling sand from miles away, while excavators and dozers moved like clockwork to build the dunes.

“I can move dirt, and I love moving dirt,” Matt says.

Surf City Town Clerk Stephanie Hobbs agrees.

“They’re a great company,” she says. “I would give them the highest rating you have. They show up in a timely manner and get the job done on time and on budget.”

Matt attributes his success to hard work and recommends the same for new contractors.

“You’ve got to work hard. You’ve got to put your time in,” he says. “When everybody else is off having fun, you’ve got to go make a deal with somebody.”

CM Mitchell construction dune restoration
C.M. Mitchell Construction dozers rebuild dunes damaged by Hurricane Florence.Equipment World 

Did you miss our previous article…
https://www.3555pacific.com/?p=186

Construction Blogs

Diesel Prices Jump as Crude Oil Hits Highest Price Since 2014

Increased demand amid the easing of the pandemic and OPEC+ supply limitations have caused the price of diesel to jump 10.5 cents in the past week. The average retail price of a gallon of on-highway diesel soared to $3.47 during the week of October 4, according to the U.S. Department of Energy’s Energy Information Administration. That’s $1.08 higher than just one year ago.

The nation’s most expensive diesel on average is in California at $4.369, while the least expensive diesel on average is $3.203 a gallon in the Gulf Coast. The Midwest region saw the nation’s highest one-week increase at 10.4 cents. The smallest one-week increase was 3.0 cents in California.

The Biden administration has urged OPEC+ to increase production and is considering releasing crude oil reserves to cool prices. U.S. West Texas Intermediate crude oil hit its highest price since 2014 at $81.06 per barrel. Crude oil accounts for 49%t of the cost of a gallon of diesel.

Price increases this fall were also impacted by storm damage. Several refineries in Louisiana are still preparing to restart after flooding and power outages caused by Hurricane Ida. Louisiana’s 17 oil refineries account for nearly one-fifth of the nation’s refining capacity and can process about 3.4 million barrels of crude oil per day, says the U.S. Energy Information Administration.

Complete diesel price information is available on EIA’s website.


Diesel prices are up more than $1 per gallon compared to one year ago.U.S. Energy Information Administration

Did you miss our previous article…
https://www.3555pacific.com/?p=183

Construction Blogs

Polaris Launches Mid-Size Pro XD UTV as a Truck Alternative on the Jobsite

Polaris has rolled out a new mid-size entry to its Pro XD Commercial lineup of UTVs, designed for hauling workers and tools around construction sites.

The mid-size UTV, which stands for utility terrain vehicle, comes in two- and four-door versions and features a bed with a 500-pound capacity. Polaris touts the new all-terrain vehicle as a lower-cost alternative to a truck or van for moving about the jobsite. Its compact size enables it to maneuver in tight spaces.

Along with hauling tools and people, it can move supplies, aggregate and other materials. The company says it can also handle mud, nails and obstacles better than a truck or van when traveling the jobsite.


Haul aggregate and other materials with the 500-pound capacity bed on the Polaris mid-size Pro XD UTV.PolarisThe mid-size vehicle follows the introduction of the company’s full-size Commercial models in 2018. It’s made for those who don’t need the 1,000-plus-pound bed capacity of the full-size UTVs. Polaris says the mid-size version provides 200-hour oil service intervals, as well as the same safety features of the full-size models, including adjustable speed calibration, operator warnings, backup horn and pedestrian alarms, high-visibility lights and improved operator visibility.

“Not all of our customers need to haul over 1,000 pounds in the cargo bed, but they still want a heavy-duty driveline, 200-hour intervals between oil changes, durable components and vehicle fault alarms,” says Aaron Stegeman, director of commercial sales, service and customer experience for Polaris Commercial.

Polaris mid-size Pro XD UTV
The mid-size Polaris Pro XD UTV is also designed for carrying tools around on the jobsite.PolarisThe mid-size Pro XD features heavy-duty driveline components for longer life. The seats are made of Kevlar-backed vinyl that is puncture resistant. The heavy-duty jobsite tires are 8-ply with nondirectional treads. Parts are designed to be universal and easy to replace. The company also says it made the roof and doors as tightly sealed as possible to keep out dust and the elements.

The UTV runs on a 39.5-horsepower Polaris Pro Star 570 DOHC (dual overhead cam shaft) gas engine.

Both the two-door and four-door models have selectable 4×4 drive. Top speed is adjustable up to 40 mph. Ground clearance is 10 inches.

Total payload is 1,000 pounds on the two-door model and 1,250 on the four-door UTV. Towing capacity is 1,500 pounds.

Polaris mid-size Pro XD UTV
The seats in the new mid-size Polaris Pro XD UTV are made of Kevlar-backed vinyl for puncture resistance.PolarisThe MSRP on the two-door model starts at $12,499, and for the four-door at $13,999.

Available accessories include various types of windshields, a windshield wiper and washer system, various types of roofs and roof liners, doors, rear window panels, lighting, sideview mirrors, among other add-ons.

 

Did you miss our previous article…
https://www.3555pacific.com/?p=178

Construction Blogs

Owens Corning 2021 Shingle Color of the Year: Aged Copper

Mr. Roof proudly provides some of the leading roofing products from Owens Corning, one of the most respected names in the roofing material manufacturing industry. We provide the highest-quality roofing materials to our clients, and Owens Corning is a significant part of our product catalog.

When it comes to having a new roof installed over your home, Owens Corning provides not only high-quality materials that offer enhanced durability and reliable protection for your home but also many different styles to suit many different tastes. Each year, Owens Corning selects a shingle color of the year based on homeownership trends across the country. The Owens Corning 2021 shingle color of the year is Aged Copper.

What is Aged Copper?

Most asphalt shingle homes throughout the United States use a single color for roof shingles. While many homeowners favor this type of look, others want a bit more visual interest. Aged Copper shingles from Owens Corning include many shades of copper, brown, and gray in a visually attractive staggered arrangement. This creates a beautifully tiled pattern across a roof as well as interesting texture effects.

The arrangement of colors found in Aged Copper roof shingles from Owens Corning means that this roof shingle option pairs exceedingly well with many other home exterior colors. Whether you love your existing home exterior or plan to upgrade it along with your roof, Aged Copper can create interesting aesthetic effects when paired with many colors. Dark greens, plum shades, grays, and earth tones are particularly well-suited to pairing with Aged Copper shingles from Owens Corning.

Why choose Aged Copper shingles from Owens Corning?

Aged Copper is just one of the many stellar shingle options manufactured by Owens Corning. Aesthetics aside, Owens Corning shingles are one of the best choices you can make for your home due to their stellar quality, durability, and long-lasting performance. Aged Copper, in particular, is well-suited to many roof styles and home exterior designs.

The Mr. Roof team will be happy to assist you with every facet of your roof replacement job. Whether you are upgrading your roof in preparation for selling your home and want to increase your property value or simply need to replace a distressed roof, we can help. We’ll help you determine which roofing system is right for you and help you consider your design options when it comes to shingle style and color. We think Aged Copper shingles from Owens Corning are stunning and versatile in all the different home styles they can enhance. If you are preparing to replace your roof and want a new shingle that enhances the overall look of your home’s exterior, Aged Copper shingles from Owens Corning are a great selection that’s both trendy and functional. Every shingle from Owens Corning comes backed by one of the best craftsmanship guarantees in the industry. You can also count on Mr. Roof to provide valuable professional guidance through every stage of the work we do for your home, and we can provide advice for other home upgrades and repairs that you may need to complete the look you want for your home. Contact Mr. Roof today for a free estimate and learn more about Aged Copper shingles from Owens Corning.

The post Owens Corning 2021 Shingle Color of the Year: Aged Copper appeared first on Mr Roof.

Did you miss our previous article…
https://www.3555pacific.com/?p=175

Construction Management

Bolt Launches New Locks That Use Your Ignition Key

Tools, trailers, receivers and ball mounts are some of the most frequently stolen items around jobsites. Bolt Lock has solutions for all of them without loading up your key ring with a lot of jangling metal.

The company’s One Key locks use specially built tumblers to memorize a vehicle’s ignition key the first time it is inserted into the lock. One complete turn of the key moves the tumblers to fit that specific key, and from that point on, your ignition key will open that lock. Commercial fleets can make duplicates of the master ignition key if they have multiple drivers.

The One Key solution can be applied to numerous security needs.

Bolt’s Stainless Steel Coupler Pin Lock fits couplers from ½-inch to 3 3/8 inches in 1/8-inch increments. The snug fit prevents movement and locks your trailer ball when hitched to a vehicle or makes the coupler unusable when off the vehicle. When your trailer is not hitched to a vehicle, the coupler pin lock secures the locking lever so it cannot be transferred to a different vehicle.

Another dual-purpose lock, the Bolt Receiver is designed to lock the ball mount receiver onto the vehicle’s hitch. It comes in two sizes: ½-inch and 5/8 inches for Class 1 and 2 hitches and Class 3, 4 and 5 hitches, respectively. The receiver lock works by locking the ball mount to the receiver. When the ball mount is attached to the receiver hitch, the receiver lock is inserted and locked into place. This specific lock can be used whether or not your trailer is hitched to the vehicle. The receiver lock prevents the ball mount from being stolen from your vehicle as well as preventing the trailer itself from being stolen with the ball mount receiver.

The company’s Off-Vehicle Coupler Lock was created to meet the demand for a lock to protect unattended trailers. The device serves as a visible theft deterrent when placed on the trailer’s coupler and prevents your trailer from being stolen and secured to another vehicle.

Bolt also offers a cable lock that can secure generators, tools and accessories with a 6-foot-long, quarter-inch black vinyl coated coiled cable. And the Bolt Padlock can be used to secure an enclosed trailer door, lock a toolbox or a gate.

 

 

Did you miss our previous article…
https://www.3555pacific.com/?p=172

Construction Blogs

Where Do Things Stand with the Infrastructure Bill and Transportation Funding?

Since the Senate’s passage of a $1.2 trillion infrastructure bill in August, negotiations have taken a turn for the partisan worse in the House.

What once seemed to be a bipartisan effort to enact the largest spending increase for infrastructure in decades has devolved into last-ditch efforts to just keep current transportation funding levels intact – but only for one more month – and to prevent the entire federal government from shutting down, at least until December 3.

What happened?

The Infrastructure Investment & Jobs Act passed the Senate August 10 in a bipartisan 69-30 vote. It includes $550 billion in new funding over five years as well as reauthorizes increased transportation funding through 2026.

Though the bill had bipartisan support in the Senate, House Democrats wanted the bill paired with a $3.5 billion package of Biden administration initiatives called the Build Back Better Plan. The plan focuses on such measures as pre-kindergarten, paid community college tuition, expansion of Medicare and addressing climate change.

House Democrats demanded that the Senate also pass that bill before it would take up the infrastructure legislation. In a party-line vote, the Senate set up the bill for a process known as reconciliation in which it could pass by a simple majority. Democrats do not have the votes to pass the legislation under the Senate’s current rule of 60 “yes” votes to pass legislation, and it’s not likely the plan would pass with reconciliation.

When the infrastructure bill and Build Back Better Plan came to the House, Republicans and liberal Democrats balked, with most of the disagreement on the Build Back Better Plan. Scheduled votes on the infrastructure bill in September and in October were pulled as there were not enough votes to pass it.

The current schedule is for the House to vote on the infrastructure bill by October 31. President Joe Biden and House Democrats have maintained that the Build Back Better Plan must be negotiated before the infrastructure bill can pass.

Meanwhile, on October 1, federal funding for state road projects and other surface transportation expired. Thousands of federal transportation department employees were furloughed. The next day, the House and Senate passed a one-month extension of the transportation funding. The employees returned and funding resumed – but only until October 31.

While all of this was going on, the country was also running up against an October 18 deadline to raise its debt limit or face default. Senate Republicans said this was the Democrats’ responsibility, and they should extend the debt limit via the reconciliation process that would require a simple majority. Democratic senators said there was not enough time to enact reconciliation and that in the past raising the debt limit had been a bipartisan function.

On Thursday, the debt-limit crisis was temporarily averted when a compromise passed the Senate to raise the debt ceiling by $480 billion until December 3.

What’s next?

The focus in Washington now centers on the Build Back Better Plan and reducing its $3.5 trillion pricetag to one that Democrats can agree on. Biden has suggested $2 trillion, while swing-vote Senator Joe Manchin (D-W.Va.) is saying $1.5 trillion is the most he could support.

Construction industry and business groups are urging Congress to pass the infrastructure bill and separate its consideration from the Build Back Better Plan, which also includes an increase in the corporate tax rate.

“AGC is very disappointed that this historic investment in our nation’s infrastructure has yet again been delayed, and will continue calling on the House to pass the Infrastructure Investment and Jobs Act as soon as possible,” says a statement from the Associated General Contractors.

AGC says it will push the House to pass the infrastructure bill “and stop using construction companies and their workers as political leverage for the Build Back Better plan.”

“There should be no linkage between IIJA [Infrastructure Investment & Jobs Act ] and the reconciliation bill,” says the Associated Equipment Distributors. “AED will also continue to work with our industry partners in strong opposition to increasing taxes and onerous regulations on America’s job creators.”

Transportation associations are also concerned about funding for state surface transportation programs, which will again expire at the end of this month.

“Short-term extensions are not a suitable way to govern,” says Jim Tymon, president of the American Association of State Highway and Transportation Officials. “AASHTO remains focused on the passage of a long-term surface transportation bill to ensure the delivery of a safe and efficient multimodal transportation system, and we urge Congress to do the same.”

The American Road & Transportation Builders Association, along with the 32 other members of the Transportation Construction Coalition, recently wrote to Republicans and Democrats who oppose the infrastructure bill urging their reconsideration.

The letter disputes Republicans’ assertions that the bill is simply a tactic to enact the Build Back Better Plan.

“This legislation, on its own, would increase every state’s highway formula funding by an average of 35 percent,” the TCC letter says. “These significant investments will immediately begin to create new, well-paying careers and improve our nation’s roads and bridges, which will increase productivity and economic competitiveness for decades to come.”

What’s at stake?

The infrastructure bill would add $488 billion to the U.S. economy by 2027, with just the additional $153.7 billion slated for new highway, bridge and public transit investment, according to ARTBA.

Citing an analysis by IHS Markit, ARTBA says the transportation investment would also create 250,000 new jobs by 2025, with half being outside the construction industry.

An S&P Global report estimates the entire infrastructure package would create 880,000 jobs over the next decade, particularly middle-class positions in construction, engineering, transportation and energy, and would boost the overall economy by $1.4 trillion over eight years.

Here are some highlights of the additional $550 billion in spending over five years included in the infrastructure bill approved by the Senate:

Roads, bridges, major projects – $110 billionPower infrastructure – $73 billionPassenger and freight rail – $66 billionBroadband infrastructure – $65 billionDrinking water infrastructure – $55 billionPublic transit – $39 billionAirports – $25 billionPorts and waterways – $17 billionTransportation safety – $11 billionElectric vehicle infrastructure – $7.5 billionElectric buses and transit – $7.5 billionReconnecting communities split by highway projects – $1 billion
Did you miss our previous article…
https://www.3555pacific.com/?p=169

Construction Blogs

“Good News”: Nonresidential Project Planning Rises, Says Dodge

September saw an uptick in planned nonresidential building projects, despite concerns about Covid-19, pricing and the political stalemate in Washington over the infrastructure bill.

The Dodge Momentum Index posted an 11% gain over August to 164.9, and a 30% increase over last September.

“The gain in the Momentum Index and its components in September is certainly good news and a sign that owners and developers are looking past the current concerns over pricing, Delta and politics and are moving forward with projects to meet demand,” says a news release from the Dodge Construction Network, which issues the monthly index.

The index’s commercial planning component rose by 13%, and the institutional component rose 8% over August.


The Dodge Momentum Index increases in September.Dodge Construction NetworkDodge says planning for nonresidential building projects began to recover early this year, but they declined during summer due to higher material prices and shortages in supplies and labor.

September’s turnaround saw a broad-based increase in project planning, with the exception of the health care sector, which has seen a drop in projects planned in the past several months, Dodge says.

When compared to September 2020, last month’s overall index increased 30%, with commercial up 32% and institutional up 25%.

Dodge believes that more ups and downs are ahead for the index. “Month-to-month volatility in the data is likely to remain for some time.”

Dodge Momentum Index over time
The Dodge Momentum Index’s peaks and valleys since 2004.Dodge Construction NetworkSeptember’s increase was driven by 17 projects costing more than $100 million each. Those projects include the $500 million “The Star” office building in Los Angeles; a $250 million office project in Cambridge, Massachusetts; and a two-phase lab facility in Boston that totals $675 million.

Did you miss our previous article…
https://www.3555pacific.com/?p=165

Construction Services

Philadelphia Contractor Wins Equipment World’s 2021 Safety Award

Concrete Cutting Systems of Pennsylvania has been named the winner of the 2021 Safety Award, presented annually as part of Equipment World’s Contractor of the Year Award program.

David Nevrotski started Concrete Cutting Systems in 1995 in the basement of his house in Philadelphia. Today, it is an $11 million to $13 million company with 75 employees, including a branch office in Pittsburgh. Along with being the safety award winner, Nevrotski is one of 12 Constractor of the Year finalists for 2021. The awards were presented September 25 at a ceremony at the Wynn hotel in Las Vegas. Presenting the safety award was Hiro Tongu, marketing manager at Caterpillar, a sponsor of the Contractor of the Year program for 21 years.

Specializing in difficult concrete cutting and drilling projects – with blades as large as 66 inches in diameter – the company makes safety a top priority so its workers go home each day injury-free.

Despite the dangers of the job, the company has experienced no lost-time injuries, no OSHA violations and has an experience modification rate of .73.

All of its workers have been certified to meet stringent federal silica dust requirements that took effect in recent years. All workers also have OSHA 10 certification, and many are cetified to OSHA 30.

Concrete Cutting regularly brings in a safety consultant to perform training. It also offers employees CPR instruction. Every month, a company-mandated stand down occurs to discuss  various safety topics.

Workers are also encouraged to bring up any concerns or suggest improvements. The company has offered incentives for workers who follow safety practices.

Often working at night on road projects, their trucks can be seen from far away by motorists, with lights underneath, on top and a strobe on the back. The company demands that the prime contractor have an attenuator truck on the jobsite and that when possible Jersey barriers and other safety structures are in place. Their workers can also be seen wearing lighted hard hats for additional protection.

“We try to get as much of the newest and best safety equipment out there,” Nevrotski says.

During the pandemic, the company policy was one person per truck. Each truck was also sanitized every day after returning to the office. Employees were provided masks, hand sanitizer and followed social distancing practices.

“They are extremely safety oriented,” says Mark Bastian, senior vice president of CTX Infrastructure. “We do work for natural gas utilities, which have some of the more stringent safety requirements. We have never had an issue with using them as one of our subs on the jobs.”

Adds another contractor client, Bryan Fleming of James J. Anderson Construction, “Their safety practice is one of the best around in the industry.”

Did you miss our previous article…
https://www.3555pacific.com/?p=162

Construction Management

“Minimum Swing with Maximum Space”: JCB’s New 245XR Excavator

JCB has expanded its X Series of excavators with the reduced tailswing 28-ton 245XR while maintaining the lineup’s spacious cab.

Between 2018 and 2019, JCB rolled out five X Series excavators. But Tim Burnhope, chief innovation and growth officer, said there was still something missing in the line. As infrastructure needs and funding have grown, more contractors are finding themselves on tighter jobsites.

“We needed to complement our existing conventional tailswing models with a reduced tailswing model, a machine that could [operate] safely in urban settings, on utilities jobsites and on road construction projects,” Burnhope says.

That led JCB to develop the 5-foot 8-inch tailswing model, which has 40% less tail swing than its sister model the 220X. At 28 tons, the 245XR weighs 2 tons more than the 220X. JCB says it gave the 245XR an extra 2 tons of counterweight, and it recessed the counterweight to protect the rear end from impact damage.


JCB designed the reduced-tailswing 245XR excavator for such tasks as roadwork beside traffic.JCBThe next challenge was to reduce tail swing without sacrificing any space for the series’ standard Command Plus cab. JCB reports that the operator station is the same size as the 220X at 39 inches wide and 100 cubic feet of volume, delivering what it calls “minimum swing with maximum space.”  

To achieve the same performance, the company developed what it calls its strongest ever boom. The standard boom is composed of one piece for strength and lighter weight, according to Burnhope. A triple-articulated boom is optional.

A dipper-arm choice of 94 or 118 inches is offered. Dig reach with the mono boom is 31 feet and dig depth is 22 feet. The turntable rated at 26 tons is designed to increase digging force while distributing the force throughout the undercarriage, says Adrian Hall, heavy excavators product general manager.

The 245XR is equipped with heavy-duty track pads of 600 to 900 millimeters for “exceptional stability,” Burnhope says. A dozer blade is optional.

JCB 245XR excavator reduced tail swing
The JCB 245XR excavator’s dig reach with the mono boom is 31 feet and dig depth is 22 feet.JCBThe new excavator – along with all of the five other models in the X Series – gets a new JCB Stage V engine. Stage V is the new European emissions standard. The 245XR runs on a 172-horsepower JCB 448 diesel engine. Stage V and Tier 4 Finals emissions standards are achieved by selective catalytic reduction, diesel particulate filter and diesel oxidation catalyst.

Burnhope says the new engine does not require exhaust gas recirculation. He also says the new engine burns cleaner than the former diesel engine on the 220X, but delivers the same amount of torque of 708 foot-pounds. It also consumes 5% less fuel than the former Tier 4 motor, he says.

The engines now also feature auto-stop and auto-idle as standard to reduce fuel consumption and emissions when not in use.

JCB designed the excavator’s hydraulics for precise, smooth movement. The system features the latest Kawasaki pumps and Kayaba main control valve. The diameter of the hydraulic hose has been increased to improve hydraulic flow for increased performance and efficiency, Burnhope says.

JCB 245XR excavator reduced tail swing cab
JCB kept the same Command Plus cab on its other five X Series excavators on the reduced-tailswing 245XR.JCBThe full-size Command Plus cab is equipped with a variety of seat choices, including one with built-in heating and cooling and electric lumbar support. Standard cab features include rear and side cameras, heating and air, and Bluetooth integrated into the 7-inch control screen. The cab has double cushion viscous mounts to reduce vibration, and interior noise to 69 decibels. The joystick and switch controls are mounted to the seat and move with the operator.

JCB also placed the 245XR’s main service points in one ground-level compartment that is accessed by a large swing door. The company increased service intervals to 2,000 hours for air and hydraulic filters, and to 500 hours for engine oil.

Quick Specs

Max bucket capacity – 1.63 cubic yardsMax operating weight – 60,184 poundsHorsepower – 172Tail swing – 5 feet 8 inchesTravel speed – 1.99 to 3.54 mphMax digging reach (mono boom) – 32 feet 1 inchMax digging depth (mono boom) – 21 feet 9 inches

 

 

Did you miss our previous article…
https://www.3555pacific.com/?p=157

Construction Services

From Brooms to Blowers, 11 Attachments for Clearing Snow

Winter weather is close at hand, so it’s time to start thinking about snow-clearing equipment.

Contractors have a variety of attachments to choose from to equip their construction equipment or pickup trucks to remove snow and ice from roads, parking lots and other surfaces.

Here are 11 attachments to consider:

Bobcat’s hydraulically driven angle broom attachment (pictured above) can handle quick cleanup jobs without damaging pavement surfaces. The bristles’ waved design creates a cleaner path and can sweep more snow or debris in one pass. Reverse bristle rotation is available on the 68- and 84-inch angle brooms for sweeping leaves, snow and debris away from corners, curbs, buildings and obstacles. The standard orange heavy-duty bristles are designed for longer life and better visibility. The attachment is available for Bobcat’s M and R series compact track loaders and skid steers and Bobcat Toolcats.


Doosan snow pusherDoosanDoosan’s bucket-mounted snow pusher attachment is designed for the company’s 13- to 20-metric-ton wheel loaders and toolcarriers. The attachment comes in two versions: 12 feet wide at 2,200 pounds and 14 feet wide at 2,400 pounds. The pusher is designed to be an alternative to buckets and traditional plowing for clearing parking lots and roads. Features include a 47-inch moldboard for high-capacity snow removal, a 1.5-inch rubber cutting edge to protect surfaces, high-grade steel skid shoes, a 12-inch push beam and three bucket-mount support tubes to help keep the snow pusher rigid.

Fisher Storm Boxx snow plow
Fisher Storm Boxx snow pusherFisherFisher made its Storm Boxx pusher plows for large construction equipment, such as wheel loaders and backhoes. Models are available at 12, 14 or 16 feet wide. A two-piece steel trip edge is designed to deliver a cleaner scrape of hardpacked snow and ice. It also protects the operator and equipment when hitting hidden obstacles. Floating attachment plates allow side-to-side movement and smooth out bumps, keeping the pusher in continuous contact with the surface. It is also designed to be easily attached to various equipment.

Hilltip salt spreader pickup truck
Hilltip salt spreaderHilltipHilltip’s new IceStriker 2000-3300 SSA/SSC stainless-steel salt spreaders are designed for three-quarter-ton trucks. The device can spread bulk sand and gravel, bulk/bag salt, sand-salt mixes and fertilizers. It is offered in three sizes: 2, 2.65 and 3.3 cubic yards. The stainless steel wards off corrosion, and Hilltip also immerses its hoppers in an acid bath to ensure corrosion-free welds and surfaces. An inverted “V” with a vibrator helps prevent bridging. The stainless-steel flip-up chute is designed to spread salt in environments with high humidity, and a tarp kit helps keep spreading materials dry.

HitchDoc hydraulic snow blower
HitchDoc hydraulic snow blowerHitchDocHitchDoc’s all hydraulic snow blower is designed to reduce your carbon footprint. The company has eliminated the diesel engine, crankcase, shear pin and air filter, as well as the need for diesel exhaust fluid. The hydraulic blower is quieter and offers better visibility and balance. It is 9 feet wide and weighs 5,200 pounds. It is designed for wheel loaders of 2 to 4 cubic yards equipped with hydrostatic transmissions.

JCB Snow Blower
JCB Snow BlowerJCBThe JCB snow blower range features a two-stage design with the ability to throw snow 25 to 40 feet. A poly-lined chute and deflector can be adjusted to direct the snow discharge. The 25-inch standard flow shroud openings quickly dispense with high volumes of snow. The direct drive hydraulic motor design reduces the number of moving components for less wear and longer life. The blower includes adjustable skid shoes, a bolt-on replaceable wear-resistant tapered steel edge and quick release coupling. It is available in widths of 60, 72, 78 and 84 inches in either standard or high flow.

Pettibone SpeedSwing 445F snowblower
Pettibone SpeedSwing 445F with snowblowerPettibonePettibone’s Speed Swing 445F rail crane is now available with a CreepDrive system from Poclain Hydraulics that allows it to run high-flow attachments like snow blowers and power brooms at slower travel speeds on or off the rails. The CreepDrive can deliver up to 33 gallons per minute of hydraulic flow. It comes with a display interface for controlling rpms and an integrated rocker pedal for traveling the machine forward and in reverse up to 2 mph. The Speed Swing 445F provides 180-degree boom rotation and has a spacious, climate-controlled operator cab.

SnowEx heavy-duty snowplow
SnowEx heavy-duty snowplowSnowExSnowEx’s heavy-duty straight-blade snowplow gives skid steers commercial-contractor performance. It is available in four blade widths. The plow is built with a formed base channel for extra durability. Six vertical ribs, two angled Power Ribs and a quad design provide added torsional strength to prevent blade twisting. The A-frame is constructed of tubular steel to handle the toughest jobs.

Virnig picukp broom with water tank
Virnig picukp broom with water tankVirnigVirnig’s Internal Water Tank Broom for skid steers controls dust as you sweep. The protected 55-gallon tank behind the bucket provides 35 minutes of continuous runtime. The translucent tank has capacity indicators so water level can be viewed by the operator while in the cab. The guarded adjustable valve regulates water pressure to the nozzles. The broom is available in 72 or 84 inches. Features on the broom include a recessed and guarded direct drive motor, HD bucket with wear bars, bolt-on edge, oversized 2-inch bearing, poly/wire bristles and pin adjustment system.

Western Prodigy Skid Steer Snowplow
Western’s Prodigy Skid Steer SnowplowWesternThe Prodigy snowplow from Western features wings that automatically move with no additional wiring or controls. It has a universal skid-steer mounting plate. Once the pins are engaged, the plow is ready. The plow uses the onboard hydraulics system of the skid steer to lift and lower the blade. An oscillating mount that provides 6 degrees of total side-to-side oscillation is optional to improve scrape and cutting-edge wear while reducing damage to the terrain.

Winter Equipment Razor Arrow snow blade
Winter Equipment Razor Arrow snow bladeWinter EquipmentWinter Equipment’s Razor Arrow Straight Blade System is designed to give Western Pro Plus plows longer blade life and improve cutting. It features two, 4-1/2-foot Razor blade sections, two Plow Guard Juniors and grade 8 hardware. The two Plow Guard Juniors prevent uneven and premature wear on the plow’s wear bar. The Razor Arrow system includes a two-piece, pre-welded blade with 5/8-inch abrasion-resistant cover plates. The cover plates are welded to a tungsten carbide insert cutting edge for increased wear life and surface footprint. Built-in wear indicators help to track wear life.

 

 

 

Did you miss our previous article…
https://www.3555pacific.com/?p=145